win10boot bcd错误修复,windows10bcd修复

win10boot bcd错误修复

以下是修复Win10引导BCD错误的步骤：

1.使用Windows 10安装媒介，进入“安装界面”。

2.在安装界面的顶部，选择“修复您的电脑”。

3.在接下来的界面中，选择“疑难解答”选项。

4.在疑难解答界面中，选择“高级选项”。

5.在高级选项界面中，选择“命令提示符”。

6.在命令提示符中，输入“bootrec /fixmbr”并按回车键。

7.完成后，再输入“bootrec /fixboot”并按下回车键。

8.最后，再输入“bootrec /rebuildbcd”并按下回车键。

9.在命令执行完毕后，退出命令提示符窗口，关闭计算机。

10.重新启动计算机，看看是否修复了BCD错误。

windows10bcd修复

There are a few ways to repair or rebuild the boot configuration data (BCD) on a Windows 10 computer, depending on the specific issue and level of access to the system. Here are some possible steps you can try:

1. Use automatic repair

If your Windows 10 computer cannot start up properly due to BCD errors, you can use the automatic repair feature built into the operating system. This feature can help diagnose and fix startup issues, including problems with BCD. Here's how to perform an automatic repair:

1. Insert the Windows 10 installation media (such as a DVD or USB flash drive).

2. Restart your computer and boot from the installation media.

3. Select your language preferences and click Next.

4. Click on the "Repair your computer" option in the lower left corner.

5. Choose "Troubleshoot" and then "Advanced options."

6. Select "Startup Repair" and follow the on-screen instructions to complete the repair process.

Note that the exact steps may vary depending on your system and installation media.

2. Use bootrec commands

If the automatic repair option doesn't work or you have more advanced issues with BCD, you can use the command prompt and run some bootrec commands to repair or rebuild the BCD. Here are the steps:

1. Boot your computer from the Windows 10 installation media as described above.

2. Choose "Command Prompt" from the advanced options screen.

3. Type the following commands one at a time and press Enter after each one:

bootrec /fixmbr

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

4. Follow the prompts and answer "Y" or "Yes" if prompted to add the Windows installation to the BCD.

5. Restart your computer and check if the BCD issues have been resolved.

3. Use recovery options

If your Windows 10 system has a recovery partition (or you have created a system image or backup), you can use the recovery options to restore your computer to a previous state before the BCD errors occurred. Here's how to do it:

1. Restart your computer and repeatedly tap the F11 key (or another key depending on your system) during boot to access the recovery options.

2. Choose "Troubleshoot" and then "Advanced options."

3. Select "System Restore" or "System Image Recovery" and follow the on-screen instructions to restore your system to a previous state when it was working properly.

4. Check if the BCD issues have been resolved after the restore process is complete.

Note that system restore or system image recovery may erase some of your recent data, so make sure to back up your important files before attempting this option.

In any case, if you're not comfortable or confident with these steps, you may want to seek professional help or contact Microsoft support for further assistance.

window10 bcd损坏

如果您的Windows 10启动时提示BCD损坏，您可以尝试以下步骤来修复它：

1. 在Windows 10安装媒体中进入“修复你的计算机”选项。您可以使用DVD、USB闪存驱动器或其他启动介质。

2. 选择“故障排除”>“高级选项”>“命令提示符”。输入以下命令：

`bootrec.exe /fixmbr`

`bootrec.exe /fixboot`

`bootrec.exe /rebuildbcd`

3. 重启计算机并检查是否解决了问题。

如果这些步骤无法解决问题，您可能需要重新安装Windows 10或者求助于专业技术支持。

win10 bcd修复命令

以下为Win10 bcd修复命令：

1. 打开一个管理员权限的命令提示符，方法为右键单击‘开始’菜单，选择‘命令提示符(管理员)’。

2. 输入以下命令以备份原有的引导文件

bcdedit /export C:\BCD_Backup

3. 依次执行以下命令：

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

4. 如果上述命令无法修复引导文件，可以执行以下命令：

bootrec /repairbcd

bootrec /fixmbr

bootrec /fixboot

5. 最后输入以下命令重新开始计算机：

shutdown /r /t 0

以上是Win10 bcd修复命令，希望对您有所帮助。注意：在执行这些命令之前，请备份数据以及引导分区，以防数据损失。

window10bcd怎么修复

如果你的Windows 10启动时出现了“BCD文件错误”或“无法启动Windows”等问题，可以尝试以下几种方法修复BCD:

方法一：使用Windows 10的自动修复工具：

1. 在Windows 10的安装介质中进入“修复你的电脑”选项。

2. 选择“疑难解答”>“高级选项”>“启动修复”。

3. 等待自动修复完成。

方法二：使用命令提示符进行修复：

1. 在Windows 10的安装介质中进入“修复你的电脑”选项。

2. 选择“疑难解答”>“高级选项”>“命令提示符”。

3. 在命令提示符窗口中输入以下命令并依次按下回车键：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

4. 在提示时选择“是”或“Y”。

5. 重启电脑，看是否修复成功。

方法三：使用第三方修复工具：

如果以上方法无法修复BCD，则可以尝试使用第三方修复工具如EasyBCD或BCD Editor等。

注意：在尝试修复BCD之前，最好备份你的重要数据以避免数据丢失。