免费发布信息
微信公众号

Win10 BCD修复怎么办,win10boot bcd错误修复

   来源:黔优网责任编辑:优优  时间:2024-05-21 17:03:56 浏览量:0

Win10 BCD修复怎么办

如果您的Win10无法启动,并且出现了错误信息“Boot Configuration Data(BCD)缺失或损坏”,则需要进行BCD修复。以下是一些修复BCD的方法:

方法1:使用Windows 10安装光盘进行修复

1. 将Windows 10安装光盘插入计算机

2. 选择“修复您的计算机”选项

3. 选择“疑难解答”>“高级选项”>“命令提示符”

4. 在命令提示符中,输入以下命令并按“Enter”键:

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

方法2:在Windows 10安全模式下进行修复

1. 重启计算机,并按F8键进入“高级启动选项”

2. 选择“安全模式”选项,进入Windows 10安全模式

3. 按Win键+X键,选择“命令提示符(管理员)”

4. 在命令提示符中,输入以下命令并按“Enter”键:

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

以上两种方法都可以试试看,如果遇到问题可以寻求专业人士的帮助。

win10boot bcd错误修复

以下是修复Win10引导BCD错误的步骤:

1.使用Windows 10安装媒介,进入“安装界面”。

2.在安装界面的顶部,选择“修复您的电脑”。

3.在接下来的界面中,选择“疑难解答”选项。

4.在疑难解答界面中,选择“高级选项”。

5.在高级选项界面中,选择“命令提示符”。

6.在命令提示符中,输入“bootrec /fixmbr”并按回车键。

7.完成后,再输入“bootrec /fixboot”并按下回车键。

8.最后,再输入“bootrec /rebuildbcd”并按下回车键。

9.在命令执行完毕后,退出命令提示符窗口,关闭计算机。

10.重新启动计算机,看看是否修复了BCD错误。

win10开机bcd错误怎么修复

以下是修复win10开机bcd错误的步骤:

1. 使用Win10安装盘启动电脑。在进入安装界面后,单击“修复计算机”。

2. 选择“故障排除”。

3. 选择“高级选项”。

4. 选择“命令提示符”。

5. 在命令提示符界面输入“bootrec /fixmbr”并按回车键。

6. 输入“bootrec /fixboot”并按回车键。这将重新构建你的系统启动区。

7. 输入“bootrec /scanos”并按回车键。这将扫描所有的可用Windows系统。

8. 输入“bootrec /rebuildbcd”并按回车键。这将重建BCD数据,让它包含所有安装的Windows系统记录。

9. 重启你的计算机。

以上就是修复win10开机bcd错误的步骤,希望能帮到你。

win10开机bcd错误怎么修复

以下是修复win10开机bcd错误的步骤:

1. 使用Win10安装盘启动电脑。在进入安装界面后,单击“修复计算机”。

2. 选择“故障排除”。

3. 选择“高级选项”。

4. 选择“命令提示符”。

5. 在命令提示符界面输入“bootrec /fixmbr”并按回车键。

6. 输入“bootrec /fixboot”并按回车键。这将重新构建你的系统启动区。

7. 输入“bootrec /scanos”并按回车键。这将扫描所有的可用Windows系统。

8. 输入“bootrec /rebuildbcd”并按回车键。这将重建BCD数据,让它包含所有安装的Windows系统记录。

9. 重启你的计算机。

以上就是修复win10开机bcd错误的步骤,希望能帮到你。

windows10bcd修复

There are a few ways to repair or rebuild the boot configuration data (BCD) on a Windows 10 computer, depending on the specific issue and level of access to the system. Here are some possible steps you can try:

1. Use automatic repair

If your Windows 10 computer cannot start up properly due to BCD errors, you can use the automatic repair feature built into the operating system. This feature can help diagnose and fix startup issues, including problems with BCD. Here's how to perform an automatic repair:

1. Insert the Windows 10 installation media (such as a DVD or USB flash drive).

2. Restart your computer and boot from the installation media.

3. Select your language preferences and click Next.

4. Click on the "Repair your computer" option in the lower left corner.

5. Choose "Troubleshoot" and then "Advanced options."

6. Select "Startup Repair" and follow the on-screen instructions to complete the repair process.

Note that the exact steps may vary depending on your system and installation media.

2. Use bootrec commands

If the automatic repair option doesn't work or you have more advanced issues with BCD, you can use the command prompt and run some bootrec commands to repair or rebuild the BCD. Here are the steps:

1. Boot your computer from the Windows 10 installation media as described above.

2. Choose "Command Prompt" from the advanced options screen.

3. Type the following commands one at a time and press Enter after each one:

bootrec /fixmbr

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

4. Follow the prompts and answer "Y" or "Yes" if prompted to add the Windows installation to the BCD.

5. Restart your computer and check if the BCD issues have been resolved.

3. Use recovery options

If your Windows 10 system has a recovery partition (or you have created a system image or backup), you can use the recovery options to restore your computer to a previous state before the BCD errors occurred. Here's how to do it:

1. Restart your computer and repeatedly tap the F11 key (or another key depending on your system) during boot to access the recovery options.

2. Choose "Troubleshoot" and then "Advanced options."

3. Select "System Restore" or "System Image Recovery" and follow the on-screen instructions to restore your system to a previous state when it was working properly.

4. Check if the BCD issues have been resolved after the restore process is complete.

Note that system restore or system image recovery may erase some of your recent data, so make sure to back up your important files before attempting this option.

In any case, if you're not comfortable or confident with these steps, you may want to seek professional help or contact Microsoft support for further assistance.

 
 
 
没用 0举报 收藏 0
免责声明:
黔优网以上展示内容来源于用户自主上传、合作媒体、企业机构或网络收集整理,版权争议与本站无关,文章涉及见解与观点不代表黔优网官方立场,请读者仅做参考。本文标题:Win10 BCD修复怎么办,win10boot bcd错误修复,本文链接:https://www.qianu.com/news/441341.html,欢迎转载,转载时请说明出处。若您认为本文侵犯了您的版权信息,或您发现该内容有任何违法信息,请您立即点此【投诉举报】并提供有效线索,也可以通过邮件(邮箱号:kefu@qianu.com)联系我们及时修正或删除。
 
 

 

 
推荐图文
推荐商业资讯