win10系统bcd修复

win10系统bcd修复

1. 使用Windows 10 安装光盘或U盘启动电脑。

2. 进入“修复计算机”模式。

3. 在“选择一个选项”中选择“疑难解答”。

4. 在“高级选项”中选择“命令提示符”。

5. 在命令提示符中输入“bootrec /fixmbr”回车。

6. 在命令提示符中输入“bootrec /fixboot”回车。

7. 在命令提示符中输入“bootrec /rebuildbcd”回车。

8. 选择“是”以确认修复启动项并重建BCD存储器。

9. 重启电脑。

window10bcd怎么修复

如果你的Windows 10启动时出现了“BCD文件错误”或“无法启动Windows”等问题，可以尝试以下几种方法修复BCD:

方法一：使用Windows 10的自动修复工具：

1. 在Windows 10的安装介质中进入“修复你的电脑”选项。

2. 选择“疑难解答”>“高级选项”>“启动修复”。

3. 等待自动修复完成。

方法二：使用命令提示符进行修复：

1. 在Windows 10的安装介质中进入“修复你的电脑”选项。

2. 选择“疑难解答”>“高级选项”>“命令提示符”。

3. 在命令提示符窗口中输入以下命令并依次按下回车键：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

4. 在提示时选择“是”或“Y”。

5. 重启电脑，看是否修复成功。

方法三：使用第三方修复工具：

如果以上方法无法修复BCD，则可以尝试使用第三方修复工具如EasyBCD或BCD Editor等。

注意：在尝试修复BCD之前，最好备份你的重要数据以避免数据丢失。

windows10bcd修复

There are a few ways to repair or rebuild the boot configuration data (BCD) on a Windows 10 computer, depending on the specific issue and level of access to the system. Here are some possible steps you can try:

1. Use automatic repair

If your Windows 10 computer cannot start up properly due to BCD errors, you can use the automatic repair feature built into the operating system. This feature can help diagnose and fix startup issues, including problems with BCD. Here's how to perform an automatic repair:

1. Insert the Windows 10 installation media (such as a DVD or USB flash drive).

2. Restart your computer and boot from the installation media.

3. Select your language preferences and click Next.

4. Click on the "Repair your computer" option in the lower left corner.

5. Choose "Troubleshoot" and then "Advanced options."

6. Select "Startup Repair" and follow the on-screen instructions to complete the repair process.

Note that the exact steps may vary depending on your system and installation media.

2. Use bootrec commands

If the automatic repair option doesn't work or you have more advanced issues with BCD, you can use the command prompt and run some bootrec commands to repair or rebuild the BCD. Here are the steps:

1. Boot your computer from the Windows 10 installation media as described above.

2. Choose "Command prompt" from the advanced options screen.

3. Type the following commands one at a time and press Enter after each one:

bootrec /fixmbr

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

4. Follow the prompts and answer "Y" or "Yes" if prompted to add the Windows installation to the BCD.

5. Restart your computer and check if the BCD issues have been resolved.

3. Use recovery options

If your Windows 10 system has a recovery partition (or you have created a system image or backup), you can use the recovery options to restore your computer to a previous state before the BCD errors occurred. Here's how to do it:

1. Restart your computer and repeatedly tap the F11 key (or another key depending on your system) during boot to access the recovery options.

2. Choose "Troubleshoot" and then "Advanced options."

3. Select "System Restore" or "System Image Recovery" and follow the on-screen instructions to restore your system to a previous state when it was working properly.

4. Check if the BCD issues have been resolved after the restore process is complete.

Note that system restore or system image recovery may erase some of your recent data, so make sure to back up your important files before attempting this option.

In any case, if you're not comfortable or confident with these steps, you may want to seek professional help or contact Microsoft support for further assistance.

Win10 BCD修复怎么办

如果您的Win10无法启动，并且出现了错误信息“Boot Configuration Data（BCD）缺失或损坏”，则需要进行BCD修复。以下是一些修复BCD的方法：

方法1：使用Windows 10安装光盘进行修复

1. 将Windows 10安装光盘插入计算机

2. 选择“修复您的计算机”选项

3. 选择“疑难解答”>“高级选项”>“命令提示符”

4. 在命令提示符中，输入以下命令并按“Enter”键：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

方法2：在Windows 10安全模式下进行修复

1. 重启计算机，并按F8键进入“高级启动选项”

2. 选择“安全模式”选项，进入Windows 10安全模式

3. 按Win键+X键，选择“命令提示符（管理员）”

4. 在命令提示符中，输入以下命令并按“Enter”键：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

以上两种方法都可以试试看，如果遇到问题可以寻求专业人士的帮助。

window10 bcd损坏

如果您的Windows 10启动时提示BCD损坏，您可以尝试以下步骤来修复它：

1. 在Windows 10安装媒体中进入“修复你的计算机”选项。您可以使用DVD、USB闪存驱动器或其他启动介质。

2. 选择“故障排除”>“高级选项”>“命令提示符”。输入以下命令：

`bootrec.exe /fixmbr`

`bootrec.exe /fixboot`

`bootrec.exe /rebuildbcd`

3. 重启计算机并检查是否解决了问题。

如果这些步骤无法解决问题，您可能需要重新安装Windows 10或者求助于专业技术支持。